Installation of the photovoltaic caravan water heater:
Installation: The installation of the caravan Water Heater is very simple. With four screws, the water heater is either screwed firmly to the floor plate or to a stable wall. The mounting rails on the water heater help with a simple and safe installation.
Water connection: The water connection is made via 1/2″ Inch standard screw thread. Suitable hoses for the connection are available at any DIY store. The water heater works under pressure. A simple 12V or 24V DC pump pumps the cold water from the water storage tank into the photovoltaic water heater when needed. At the outlet of the water heater, hot water flows to the tap. There it can be mixed with cold water using an ordinary tap.
The maximum water temperature of the water heater is 65°C. When the water heater is fully heated, about 25 liters of hot water can be extracted from it at about 35 degrees.
Specifications:
Type: CPVB-10
Display: digital
Capacity: 10 litres
Anode : yes
Power supply: yes
Afm.: 280 x 280 x 440 mm. ( w x d x h )
Mounting method: universal
Mounting brackets : included
Energy class: not applicable
Power consumption: not applicable
Max. pressure: 8 Bar
Wattage: 550 watt
Water connection: ½ " inch
Weight: 7,2 Kg
Included in the delivery:
- Water heater with connection cable
- Mounting brackets
- 1 digital thermometer with 5 meter cable length
- 3-way safety valve, also called inlet combination: this is a drain valve, non-return valve and pressure relief valve in one
- Instruction manual