The gas water heater model "C-Meister" can be installed indoors and is a 13 liters per minute model. The C-Meister is a direct-vent, modulating constant temperature gas water heater.
TTulpe cares about the environment, our water heaters do not contain any hazardous materials and comply with the limits as set by RoHS Directive (EU) 2015/863 amending Annex II to Directive 2011/65/EU.
The C-Meister models also comply with Ecodesign Directive 2009/125 / EC and have the lowest NOx emissions in the market.
Self-modulating flow sensor technology regulates the amount of energy required to
heat the water needed. This provides a considerable energy saving.
The C-Meister 13 Eco is a balanced flue, room sealed gas water heater. This is the safest
type of gas water heaters available in the market. The fresh air inlet comes from outside and the
exhaust gasses are pushed outside. This makes it possible to mount the water heater in any (bath-) room without restrictions in the whole European Union.
The temperature is controlled by thermostats. Automatic safety controls are fitted to
the water heater to provide safe and efficient operation.
The device has a digital display and simple touch operation.
The temperature can be set on the display.
The TTulpe® C Meister 13 Eco is suitable for replacing your old water heater, kitchen-, bath- or shower- instantaneous water heater. But also as a new hot water supply in your apartment, tiny house, cottage or mobile home.
Maximum power consumption is a mere 52 watts, so this appliance can be used on a 12v system with a small inverter, in installations such as narrowboats, horseboxes, log cabins and shepherd huts.
NB! Our 50 mbar water heaters (P50) are mainly used in German-speaking countries. They can also be used in other countries, but in that case please make sure that you use them with a 50 mbar gas pressure regulator. These are available separately on our website (see Accessories).
TTulpe C-Meister 13 P50 Eco
- Gas type: propane, butane or LPG
- Gas pressure: 50 mbar
- Max output Power: 26 KW
- Connection: 220-240 Volt
- Max. power consumption: 52 Watt
- Nominal Output power: 22,5 kW
- Frost protection system: No
- Size: 350x640x185 mm (wxhxd)
- Minimum water pressure: 0,5 bar
- Maximum water pressure: 8 bar
- Water flow: between 3 and 13 liters per minute
- Temperature range: 30 to 65 degrees Celcius
- Connection flue gas discharge: 60/100 mm (concentric)
- Net. weight: 12 kg.
- cord with plug included
- Electric anti freezing system: No
Delivery includes two stainless steel water hoses, water shut-off valve, gas inlet adapter, Teflon tape and mounting set.